Omcan GR-IT-0080-S Instruction Manual

Contents

7OperationInstallationIMPORTANTVery easy to operate: once started you only need to put into the filler your dry bread tograte it fine and homogeneous.HOW TO LOAD THE PRODUCT TO BE CUTBread can be put in the machine also when grater is operating.1. Place a bag on the specific tongs to collect grated bread.2. Put and drop bread in the cylinder hollow.3. Place the switch on 0 position.4. Take away the bag where grated bread has been collected.WARNINGIn case of a blockage to the motor follow these instructions:1. Turn the switch to the 0 position.2. Turn it to the reverse position and keep it just few seconds in this position: thedirection of rotation is reversed, unblocking it.3. Turn the switch to the 1 position to restart the normal operation. If the motorcontinues to block, repeat the instructions from 1 to 3 until the machine operatesnormally.When the grating operation is finished switch off the toggle placing it on 0 position.OVERLOAD SWITCHThe machine is equipped with an overload switch that protects the motor in the event ofany undue stress as a prolonged blockage of the motor.The overload switch switches off the power and stops the machine.Prior to installation, test the electrical service to assure that it agrees with the specifications on the machinedata plate.ELECTRICALWARNING: This machine is provided with this plug, this plug must be connected to a properlygrounded outlet. If the receptacle is not the proper grounding type, contact an electrician.