Omcan MS-IT-0370-H Instruction Manual

Also see for 38915: Instruction manual

Contents

Omcan MS-IT-0370-H Instruction Manual Manual pdf 6 page image

6Technical SpecificationsInstallationThe slicer must be mounted horizontally on a stable, robust and antiskid base adequate to support its weight.The suggested height of the working table is of about 800mm. It must be checked that the product holder is notclamped and the product to be cut can be easily loaded.WARNING: To prevent the risk of crushing hazard, locate the machine in a manner that allows a clear spacebetween the moving table and any permanent structure.PRELIMINARY CLEANINGBefore connecting the plug clean off the protective oil from the machine.WARNINGThe working table must always be cleaned.ELECTRICAL SUPPLYThe machine must be installed in the proximity of a mains socket. Check that the power supply voltagecorresponds to that described on the information label and that it is connected to an adequate earth.1. Connect the plug.2. Check that the blade cover fastener handle is tight screwed.3. Check that the blade sharpener is lowered and the protective cover is closed.Model MS-IT-0370-HBlade Size 15” / 370mmPower 0.4 HP / 0.3 kWCheese Slicing*Slicing Volume 8 hours or moreRPM 250Cutting Size 14.6” x 10.2” / 270 x 260mmCut Thickness 0”-1” / 0-25mmElectrical 110V / 60Hz / 1Weight 125 lbs. / 57 kgs.Packaging Weight 140 lbs. / 63.5 kgs.Dimensions 31.5” x 29.5” x 22.4” / 800 x 750 x 570mmPackaging Dimensions 36” x 34” x 27” / 914 x 863 x 686mmItem Number 38915*Results may vary due to product consistency and temperature