Omcan RS-CN-0078-S Instruction Manual

Also see for RS-CN-0078-D: Instruction manual

Contents

Omcan RS-CN-0078-S Instruction Manual Manual pdf 7 page image

7Handling and AssemblySufficient spaceThe distance from both sides and back of refrigeratorto wall or other substance must be no less than10cm. The refrigeration capability may decrease if itssurrounding space is too small to circulate air.Well ventilatedAlways locate the refrigerator in an area with goodventilation. When using for the first time, wait for 24hours after handling to start.Far from heat sourceNever place the refrigerator direction under sunlight.Never locate it near any heat source to preventreducing refrigeration capability.No heavy loadNever put any heavy objects on top of therefrigerator.Do not make holesNever make any holes on the refrigerator. Do notattach any objects onto the refrigerator.Stable LocationUnpack and place the refrigerator on flat and stableground.Exclusive power socketNormally, the power supply should be 100 – 110V, 60Hz single phase AC with exclusive single phase twopin receptacle.Do not share the socketNever let the refrigerator share a socket with anotherappliance. The cable may become hot and this maycause a fire.Protect cablesNever break or damage the cables as this may causeelectrical shock.No water flushingNever give the refrigerator surface a flush otherwiseelectrical shock may occur.Avoid flammable and explosive objectsNever put any flammable or explosive items insidethe refrigerator such as gasoline or alcohol. Never putany dangerous product nearby the refrigerator.No sprayDo not spray the unit with a flammable substancesuch as paint. This may result in a fire.After power breakAfter power break or unplugging the refrigerator,always wait at least 5 minutes before starting therefrigerator again.No medicineNo medicine is allowed to be kept inside therefrigerator.OperationBefore use:Plug the refrigerator on 110V exclusive socket. After the refrigerator is running,test the air suction to confirm that it is sufficiently cold. Then you may put food anddrinks inside.Mechanical Temperature controller:For normal use, put the controller at “MID-HIGH”. The evaporator might befrosted if the controller is at the “FREEZE” setting and the refrigerator capability