Omcan VP-CN-0749 Instruction Manual

Contents

8OperationNOTES:• Silicone rubber strip come with one side nerving and the other for letter and number inserting. It will haveembossed effect on sealing surface.• Please do not run the machine without any vacuum bag attach. Otherwise, the heating element will havehigher wear and tear.• Cut off the power supply and pull out external plug when no use.• The vacuum gauge/meter reading may be different due to different area. At high altitudes,the data invacuum meter goes down.• Please adopt suitable cooling measure when processing is done in a high temperature occasion.• Please use the vacuum bag whose material does not bring any poisonous gas in the sealing.• The machine should be placed horizontally in the transportation, the inversion is not allowed.The transportation must be proceeded strictly according to the instructing marks on the shipping case.• The machine should be stored in dry, ventilated, normal temperature place.• Mind your head when the lid open, and avoid the lid striking your head.• Please ask a professional to solve the problem. Do not do some repair works by yourself.• The spare parts should match our machine in the replacement.MaintenanceSEALING TAPE AND HEATING WIRE REPLACEMENT1. Disconnect the cable from the pin, then pick the complete sealing bar up from the vacuum chamber.2. Remove the pressing stick from the complete sealing bar by cross screwdriver, then remove the stainlesssteel base (gas bag base).