Omcan WC-CN-0181-D Instruction Manual

Also see for WC-CN-0040-D: Instruction manual

Contents

9MaintenanceIn order to ensure best performance and long-lasting reliable working item, please follow the simplemaintenance and cleaning operation as follows:• Make sure the power cord is unplugged before cleaning the back of your cabinet or before moving it.• Clean the inside of your cabinet thoroughly once a year after unplugging and unloading it. Use water and amild cleaning item then rinse carefully.• To assure that your wine cooler provides a long-lasting reliable performance, you should check it regularlyand inform your dealer if anything unusual is found.TroubleshootingPROBLEM SOLUTIONNot Working Check if it is plugged in or notFuse breakNo powerCooling problem Heat source near the itemVentilation not wellDoor is not close well or the door is open for so longThere is a door sealing problem or deformationBottles are loading too much in same shelfThe air inlet or outlet is blockedControl setting problemVentilation space in the right and left casing is not enoughNoisy Wine cabinet place is not flatItem is touching the wallSome parts are loose or taken offEnsure bottle and shelf safety• Spread your bottles out as evenly as possible over the shelves, so weight is not concentrated in one point;and make sure your bottles will not touch the back of the cabinet.• Make sure bottles are not grouped together at the top or bottom of the cabinet.• Following loading instructions provided, according to the type of storage fixtures with which your cabinet isequipped and never stack bottles on a sliding shelf.• Due to humidity which will be fluctuated based on room humidity and temperature, please make special filmto pack before storage inside cabinet, which will ensure the label of bottle could not be damage.OperationIf problem still occurs after checking above, please try to contact service provider or dealer.