Omnia ONE Installation And Operation Manual

Also see for ONE: Installation and operation manual Installation and operation manual

Contents

Omnia ONE Installation And Operation Manual Manual pdf 64 page image

The Main Menu should appear:Click on the “Remote” linkoption from the top menu or“Meters & Remote Control”option from the Main Menu.You may see the Java logo and then the main Remote Control screen should appear. If audio is present on theOmniaONE’s inputs, you should see the meters moving along with the audio. A small amount of flickering isnormal as the meter information is updated but if it is excessive or the meters are not moving smoothly, check yournetwork connection and/or update your video card drivers or settings.There are 5 “tabs” in the Multicast style Remote Control applet: Preset, Processing, In, Out and IO.PresetTo enter the Preset menu,click on the “Preset” taband the Preset dialog willappear:From the Preset menu,you can select, save anddelete presets stored inthe OmniaONE unit.These are the sameoperations that can beperformed from theOmniaONE’s frontpanel, but consolidatedon a single menu.To select a preset and put it “on the air”, double-click on it in the preset list or highlight it and click the “Select”button.Note: In the current software, when selecting presets from the remote, the Preset: name will not be refreshed on theOmniaONE’s front panel. To refresh the front panel preset name, simply click the OmniaONE’s jog wheel to enterone of the menus and then click “<-Exit”. (Or enter the Preset menu, rotate the Jog Wheel to the right and select“Cancel*”To save changes to the currently running user preset (as shown in the gray status bar at the bottom of the remotewindow), click the “Save Current” button. It does not matter what preset is highlighted in the preset list. Thecurrently running preset will be updated with your changes.To save the current settings as a new preset, click the “Save Current As” button. A new applet window will openwith a dialog box where you can type the name of the new preset. For convenience, there is also a dropdown menuwhere you can select an existing preset name to start with. Once the new preset name appears as desired, click the“Save” button. The new preset will be saved to the unit and will appear in the preset list. To cancel without saving,simply close the applet window.OmniaONE Multicast - Use and Operation Manual – Version 0.9064