Before the main switch:TerminalThe Omnicomm Terminal must be installed inside the vehicle cabin or inside aspecially designed electrical equipment box: weather- and precipitation-proofed andfixed on the vehicle. Drill 4 mounting holes, 4 mm in Ø.Here is an example for Omnicomm Smart Terminals:7Terminal

General Information

Output Connectors

Power supply and Ignition key

Terminal

General Configuration Information

Remote Configuration Server (RCS

Configuring Operational Parameters

Collecting Data

Communication Server Connection

Speed source selection

Ignition key status

Accelerometer

technical specifications

Omnicomm Smart 3.0 User Manual

Smart 3.0


Contents Table Of Contents General Information Output Connectors Power supply and Ignition key Terminal General Configuration Information Remote Configuration Server (RCS Configuring Operational Parameters Collecting Data Communication Server Connection Speed source selection Ignition key status Accelerometer technical specifications	Before the main switch:TerminalThe Omnicomm Terminal must be installed inside the vehicle cabin or inside aspecially designed electrical equipment box: weather- and precipitation-proofed andfixed on the vehicle. Drill 4 mounting holes, 4 mm in Ø.Here is an example for Omnicomm Smart Terminals:7Terminal Previous Next / 39