PAS Systems International PAS V Instruction Manual
Also see for PAS V: Calibration manual
                        | |
Contents | 
6LED FLASHLIGHT OPERATIONFlashlight Control Switch (LED Bulb)➢ Press and Release the flashlight switch (you will hear a “click”) at the topof the front of the tube. Bulb turns “ON” in “HIGH” mode.(CAUTION: Bulb will get VERY HOT in “HIGH” Mode – do not touch)➢ Gently tap the same switch to put the flashlight in “LOW” mode. Battery willlast up to 190 minutes in this mode.➢ Gently tap the switch again to put the flashlight in “STROBE” mode.➢ Press and Release the flashlight switch fully (you will hear a “click”) while inany mode to turn off the bulb. If bulb is off for more than 3 seconds, thenext time the bulb is turned “ON” – it will default to “HIGH” mode.Bulb ReplacementYou will need to replace the flashlight lamp module when it burns out.Replacement modules (including easy-to-follow instructions) are available fromPAS Systems International. |
Related manuals for PAS Systems International PAS V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine