PASCO AirLink PS-3200 Reference Manual

Contents

technical support

PASCO AirLink PS-3200 Reference Manual Manual pdf 1 page image

Reference Guide013-14636CPASCO AirLink ®PS-3200800-772-8700 (US) +1 916 462 8384www.pasco.com support@pasco.comHardwareIntroductionThe PASCO AirLink is a combination wireless and USB device that connects to a computer or tablet device throughBluetooth SMART, and can also connect to a computer with a USB cable (included). The AirLink is powered with arechargeable battery and it has a single port that accepts any PASPORT sensor or adapter. Since each AirLink has aunique device identification code, more than one AirLink can be connected to a computer or tablet device at the same time.The PASCO AirLink can be used to do any experiment that involves a PASCO sensor.If the AirLink is plugged into a USB charger, it can still be used to collect data wirelessly using Bluetooth SMART.Initial Step: Charge the Battery• Connect the Cable: Use the Micro USB Cable to connect the MicroUSB port on the PASCO AirLink to a USB port or USB charger (suchas the PS-3501 USB Charging Station). Charging beginsautomatically. The battery status LED will shine yellow as the battery ischarging, and will shine green when the battery is charged. The batteryis partially charged at the factory. Initial charging time may be threehours or longer depending on the power source and the condition ofIncluded Equipment Quantity Included Equipment QuantityPASCO AirLink® (PS-3200) 1 Micro USB Cable (1 meter) 1Micro USBportON buttonMicro USB CableEnd viewTopviewBluetooth status LEDBattery status LEDDevice IDPower: Rechargeable BatteryConnection:ORUSB CableBattery status LEDMicro USBcable