PASCO PS-3204 Product Manual

WirWireless pH Sensoreless pH SensorPS-3204About the PrAbout the ProductoductThe Wireless pH Sensor measures the pH of a solution within a rangebetween 0 and 14 pH. The pH measurement is transmitted wirelesslythrough Bluetooth and displayed in PASCO data collection software.The pH Sensor can also be used with alternative probes, such as IonSelective Electrodes (ISE) and the Oxidation Reduction PotentialProbe.What'What's Includeds Included• Wireless pH Sensor• pH ProbeRequirRequired Itemsed Items• Data Collection SoftwareData Collection SoftwareThis product requires PASCO software for data collection andanalysis. Either SPARKvue or PASCO Capstone can be used.PParart names and descriptionst names and descriptions1 2 3456 7 8Battery Status LightBattery Status LightWhen the light blinks red, the battery is near the end of its lifeand will need to be replaced soon.1Device IDDevice IDUse to identify the sensor when connecting using Bluetooth.2BNC Connector (Sensor)BNC Connector (Sensor)Use to connect the sensor to the pH probe. Can also be used forconnecting various ion selective electrodes, the OxidationReduction Potential Probe (PS-3515), and the Flat pH Probe(PS-3514).3Power ButtonPower ButtonPress and hold for one second to turn the sensor on or off.4Bluetooth Status LightBluetooth Status LightIndicates the status of the Bluetooth connection.LLIGHT SSTATUSRed (blink) Ready to pairGreen (blink) PairedYellow (blink) Remotely logging data5Storage BottleStorage BottleContains pH storage solution to keep the probe hydrated whilenot in use. Remove the storage bottle from the probe beforetaking measurements.6Storage Bottle CapStorage Bottle CapThe cap can remain on the pH probe when the storage bottle isremoved. Push the cap to the top of the pH probe when takingmeasurements.7BNC Connector (pH Probe)BNC Connector (pH Probe)Use to connect the probe to the pH sensor. Push and turnclockwise until the connector locks in place.Note: When connecting the probe, hold it by the connectorand not by the shaft. Twisting the shaft can damage the probe.8Product Guide012-14662CWireless pH Sensor | 1

/ 4

Related manuals for PASCO PS-3204