PaceMaster R20 Series PM810 User Manual
                            | |
PAGE 21PACEMASTER R20 SPORT TREADMILL USER MANUALC. SYMPTOMTreadmill will not power on.SOLUTION1. Verify that the power cord is plugged into a functional power outlet.2. Make sure the power switch is set to ON. To reset the power, turn thepower switch off, wait five minutes, and turn the switch back on.3. Check that the Safety Key is correctly inserted into the console.D. SYMPTOMSudden power loss while running.SOLUTION1. Check the power switch. (See Symptom C above.) To reset, set the powerswitch in the off position, wait five minutes, and switch it back on.2. Verify that the power cord is plugged into a functional power outlet. If thepower supply has been connected, power off, wait five minutes, and switchit back on.3. Pull the safety clip/safety switch, and plug it back in again.If you are unable to clear any symptoms or are in need of additionalassistance, please contact our Customer Service Team.TROUBLESHOOTING |
Related manuals for PaceMaster R20 Series PM810
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine