PaceSaver Scout RF Owner's Manual
                                        | |
Contents
| 
BOSS 4.5, RF, P3 & P4 OWNERS MANUAL 31TroubleshootingIf the power wheelchair will not move, check the following.1. Turn the power switch OFF and then back ON.2. Check to see that the joystick console is not locked. Refer to unlocking instructions.3. There is a visible circuit breaker. It is located on thefront of unit under the seat. You will not see any whiteon the button when it is set in the correct operating position.Also check to see that all of the wires are securely attachedto the box.4. Check the joystick console plug (located at the rear ofthe seat) for proper connection.5. Check the battery plugs for proper connections.6. Check the BATTERY indicator for discharged batter-ies.7. Turn the power switch OFF and then back ON a second time.8. If the wheelchair still will not move, check the LED status indicator to see if it indicates a fault and consultthe diagnostic section of this manual or contact your dealer. |
Related manuals for PaceSaver Scout RF
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine