Pacific Communications SmartIP-8SD User Manual
Also see for SmartIP-16PD: User manual
                                                                                     | |
Contents
| 
Part 3 - Configuration56• Time Out: Once Time Out has been enabled, thesystem will assume the end of a transaction if no newstring is entered within the specified duration of time.Select between 5 secs and 15 mins.Selecting RS232, RS485, USB-Serial 1 through 8, or LAN 1through 16 as the port activates the Port Setup button.Select Setup and configure the Baud Rate, Data Bit,Stop Bit, and Parity settings.• If any one of LAN1 through 16 has been selected asthe port, select the Port Setup button and configurethe network port setting.• If using a USB-serial port, the Text-In feature maymalfunction if the USB cable is removed while thesystem is in operation.• Title: Designate a name for the text-in device.• Actions: Specify which actions to take when text-in isdetected.- Record: Specify which cameras to begin linkedrecording on when an event occurs. If the scheduleis set to Event or Time & Event mode, the selectedcameras will begin linked recording when an eventoccurs.- Alarm-Out: Designate event-triggered alarm-outchannels and beeps.- Notify: Configure to be notified of events by Mail,LAN1 through 5, SNS, and/or Alert Window.- PTZ: Moves the PTZ camera to a specific presetposition when an event occurs.In order to use the Callback feature, the NVR must beregistered on the remote program.Device SetupRefer to the Menu Use on page 35 for basicinformation on using the Setup menus.Alarm-OutSelect the + icon at the bottom left corner of the screento add a schedule.You can apply different schedules for different Days ofthe week.Select icon to delete the schedule.• Dwell Time: Select a value between 5 secs and 15mins as the alarm-out duration.• Title: Designate a name for the alarm-out.• Range: Change the schedule time frame.• Mode: Select Event, On, or Off.Event Generates an alarm-out when an eventoccurs.On Alarm-out is always on.Off Alarm-out is always off.• Channels: Configure alarm-out port and beepsettings. |
Related manuals for Pacific Communications SmartIP-16PD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine