Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Packard Bell Compasseo 450 Disassembly Manual

Page 1 preview
Page 2 preview
Page 3 preview
Page 4 preview
Page 5 preview
Page 6 preview
Page 7 preview
Page 8 preview
Page 9 preview
Contents
  1. Table Of Contents
  2. About this Guide
  3. Casing
  4. Battery
  5. Main Board
  6. GPS Board
  7. Speaker
  8. Notice
Packard Bell Compasseo 450 Disassembly Manual Manual pdf 4 page image
33333Packard Bell Compasseo 450/460/480 Disassembly Manual3CasingPerform the following steps to open the casing:1. Make sure the power is OFF.2. Turn the device upside down (with the touch screen facing down).Note: Use an anti-static mat or something soft like a piece of cloth underneath the device to prevent damage to theexterior of the device.3. Remove the four hex screws securing the casing.Fig. 1Location of screws.4. Carefully separate the back cover from the device. Do not separate both parts completely, becausethey are still connected through a thin speaker cable.Fig. 2Removing the back cover.Note: When separating the back cover from the device, keep in mind not to tear the label covering the headphone,the TMC (optional), and the USB connectors on one side of the GPS device.
/ 9
Related manuals for Packard Bell Compasseo 450
Packard Bell COMPASSEO Quick Start Manual first page preview
Packard Bell COMPASSEO Quick Start Manual
This manual is suitable for:
Compasseo 450Compasseo 460Compasseo 480
Manuals database logo
manualsdatabase
Your AI-powered manual search engine