Chapter 3 85LCD Module Reassembly ProcedureReplacing the Antennas1. Remove the protective covering on the left and right Antenna pads. Place the Antenna pads in the LCDModule and press down to secure the adhesive in place.IMPORTANT: be sure the cables pass behind the shielding material as shown.2. Run the left side cable down the side and along the lower edge of the LCD Module using all the availablecable clips.3. Run the right side cable down the side of the LCD Module using all the available cable clips. Be sure thecables pass behind the shielding material as shown.Downloaded from LpManual.com Manuals
