Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Packard Bell Daytona Disassembly Manual

Page 1 preview
Page 2 preview
Page 3 preview
Page 4 preview
Page 5 preview
Page 6 preview
Page 7 preview
Page 8 preview
Page 9 preview
Page 10 preview
Page 11 preview
Contents
  1. Table Of Contents
  2. Overview
  3. Hazardous Voltage
  4. Removing the Front Bezel
  5. Removing the DVD/CD-ROM Drive
  6. Removing the Floppy Disk Drive
  7. Removing Add-In Cards
  8. Removing the Switch/LED Assembly
  9. Removing the Power Supply
  10. Notice
Packard Bell Daytona Disassembly Manual Manual pdf 9 page image
8Fig. 9: Removing the front USB port2. Extract the white connector to disconnect the USB cable from the USB port.3. To remove the USB cable also, disconnect the USB cable from the motherboardand remove it from the chassis.Fig. 10: Disconnecting the front USB port cableRemoving the Switch/LED AssemblyTo remove the switch/LED assembly and the cable, first remove the front bezel (see sectionRemoving the Front Bezel) and remove the left side cover (see section Removing the LeftSide Cover); then follow the steps below:1. Disconnect the cable from the motherboard.2. Remove the screws securing the switch/LED assembly to the chassis.Fig. 11: Removing the switch/LED assembly3. Disconnect the switch/LED assembly cable from the motherboard.Packard Bell Daytona Disassembly Manual
/ 11
This manual is suitable for:
Daytona
Manuals database logo
manualsdatabase
Your AI-powered manual search engine