Packard Bell ENTK36 Series Service Manual

Contents

Packard Bell ENTK36 Series Service Manual Manual pdf 55 page image

Chapter 3 45Disassembly ProcessIMPORTANT: The LCD Module cannot be disassembled outside of factory conditions. If any part of the LCDModule is faulty, such as the camera, antenna or LCD panel, the whole module must be replaced.The disassembly process is divided into the following stages:• External module disassembly• Main unit disassembly• LCD module disassemblyThe flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.Observe the order of the sequence to avoid damage to any of the hardware components. For example, if youwant to remove the mainboard, you must first remove the keyboard, then disassemble the inside assemblyframe in that order.Main Screw ListScrew Quantity Part NumberM2.5*8 19 86.R4F02.002M2*3 17 86.R4F02.004M2.5*5 16 86.R4F02.001M1.98*3 4 86.R4F02.008M2.5*6 2 86.R4F02.003M3*3 4 86.R4F02.005