Packard Bell EasyNote MB Series Disassembly Manual

Contents

Packard Bell EasyNote MB Series Disassembly Manual Manual pdf 3 page image

EasyNote MB Disassembly Manual 3OverviewThis document contains step-by-step disassembly instructions for the EasyNote MBseries. The instructions are illustrated where necessary with images of the part of thedevice that is being removed or disassembled.Packard Bell reserves the right to make changes to the EasyNote MB series withoutnotice.Technician NotesOnly technicians authorized by Packard Bell B.V. should attempt to repair thisequipment. All troubleshooting and repair procedures are detailed to allow onlysubassembly/module level repair. Because of the complexity of the individual boardsand subassemblies, no one should attempt to make repairs at the component level or tomake modifications to any printed wiring board. Improper repairs can create a safetyhazard. Any indication of component replacement or printed wiring board modificationsmay void any warranty or exchange allowances.Disassembly InstructionsWhen disassembling the unit, follow these general rules:n Turn off the power and disconnect all cables.n Label all removed connectors. Note where the connector goes and in whatposition it was installed.n Do not disassemble the unit into parts that are smaller than those specified inthe instructions.Reassembly InstructionsReassembly is the reverse of the disassembly process. Use care to ensure that allcables and screws are returned to their proper positions. Check that no tools or anyloose parts have been left inside the product. Check that everything is properly installedand tightened.Required ToolsAll disassembly procedures can be performed using the following tools:n Phillips (#1 bit) screwdrivern Hex bolt (5 bit) screwdrivern Small flat blade screwdriver