Packard Bell EasyNote SW Series Disassembly Manual

Contents

Packard Bell EasyNote SW Series Disassembly Manual Manual pdf 3 page image

1OverviewThis document contains step-by-step disassembly instructions for the EasyNoteSW51/SW61 (Dragon D/DN) chassis. The instructions are illustrated where necessarywith images of the part that is being removed or disassembled.Packard Bell reserves the right to make changes to the chassis without notice.Disassembly InstructionsWhen disassembling the system unit, follow these general rules:n Turn off the power.n Disconnect the AC adapter.n Remove the battery.n Do not disassemble the system into parts that are smaller than those specifiedin the instructions.n Label all removed connectors; note where the connector goes and in whatposition it was installed.Reassembly InstructionsReassembly is the reverse of the disassembly process. Use care to ensure that allcables and screws are returned to their proper positions. Check that no tools or anyloose parts have been left inside the chassis. Check that everything is properly installedand tightened.Required ToolsAll disassembly procedures can be performed using the following tools:n Philips (#2 bit) screwdrivern Hex bolt screwdrivern Flat bed screwdriver