page 8Paddle Palace A32W PRO RobotUser ManualHow to Select Spin / Top Wheel and Bottom WheelSpin can be selected by adjusting both the speed of the Top Wheel and BottomWheel and by rotating the motor head of the Robot. There are 9 different spinsto choose from:O Top SpinO Under SpinO No Spin [produced by varying the speed of top and bottom wheel]O Left Side SpinO Right Side SpinO Left Side TopspinO Left Side UnderspinO Right Side TopspinO Right Side UnderspinLoop ModulationWhen modulating the loop of the serve, loosen the Loop LockKnob with your left hand, while adjusting the Loop ModulationWheel with your right hand. When the desired setting isachieved, lock the knob.Loop LockLoop Modulation WheelAngle Modulation ( Angle of Serve)Knob A and Angle Knob control the Robot’s angle of serve. Knob Agives the option of either a fixed course or alternative course of serve.Angle Knob controls the size of the angle or the range of width of theserve.There are 3 steps for setting the angle:1. Turn Knob A and aim its red dot to a fixed point position.2. Rotate the Angle Knob to the desired angle, using the indicationlabel.3. Turn Knob A back to the alternative point position.Knob AAngle Knob