...................OTHERSTroubleshooting GuideBefore calling service personnel, please check the following chart for a possible cause to thetrouble you are experiencing.No power, red indicator is not lit upPoor colour, poor tintSpots appear on the screenStripes appear on the screenPicture is distorted, disturbed or lostDouble images or “ghosts”Snowy pictureThe remote controller does not workPRESET menu can not be enteredCHANNEL SWAP menu can not beenteredCHILD LOCK menu can not be enteredTV cabinet creaksUnevenness in colour in some parts ofthe screen.Be sure the power cord is plugged in.Contrast, colour, tint are not correctlyadjusted.Possible interferences of automobiles,motorcycle, trolley bus, neon lamps, etc.Super receiving is set ON. When thesignals are not too weak, turning on thesuper receiving may cause stripes.Possible interference of electronicinterference from another TV set, acomputer, an electronics game machine, abroadcast station, etc.Super receiving is set ON. When thesignals are stronger, turning on the superreceiving may cause distorted picture, orpicture is disturbed or lost.This may be caused by reflections fromnearby mountains or buildings.Check the antenna direction.It is possible that the aerial “lead-in” isdamaged or comes off.Check the antenna directionThe batteries may be worn out.The batteries may be installed with theirpolarity reversed.The set may be in AV mode.There may be at least one program whichis in child lock ON mode.The set may be in AV mode.The set may be in AV mode.Even if the picture or the sound is normal,changes in the room temperaturesometimes make the TV cabinet expand orcontract, making a noise. This does notindicate a malfunction.When the set is switched on, do not shiftor move the set around. Sometimes it maydevelop an unevenness in colour in someparts of the screen. This can be eliminatedby switching off the set with the POWERswitch and wait for 10 minutes beforeswitching on again.20Symptoms Check for the following items