Panasonic 30 - Toughbook - Core 2 Duo Service Manual

Also see for 30 - Toughbook - Core 2 Duo: Specifications Brochure Brochure Brochure Brochure

Contents

9.1.15. Removing the LCD Rear Case1. Remove the 8 Screws on the front side of Displayunit.2. Remove the 8 Screws on the back side of Displayunit.3. Remove 2 Antenna Covers and Tablet Latch Cover.4. Remove the 10 Screws .5. Remove the 2 Screws .6. Remove the LCD Rear Case.Screws : DRQT26+E5FKLScrews : DXYN2+J6FNLScrews : DXYN3+J10FNL9.1.16. Removing the LCD Hinge1. Remove the Cable Holder.2. Remove the 2 Screws .3. Remove the Cable Holder Plate and LCD Hinge.Screws : DXYN3+J8FNL9.1.17. Removing Inverter PCB and LCDUnit1. Disconnect the 2 Cables from 2 Connectors (CN1,CN2).2. Remove the Inverter Case and Inverter PCB.3. Disconnect the 2 Cable from 2 connector(CN900,CN901).4. Remove the TS PS2 PCB, then remove the LCD unit.9.1.18. Removing WWAN Main AntennaPCB, LAN-Main BT Antenna PCB,LAN AUX Antenna PCB and WWANAUX Antenna PCB1. Remove the 2 Screws .2. Remove the WWAN Main Antenna PCB.3. Remove the 2 Screws .4. Remove the LAN-Main BT Antenna PCB.5. Remove the 2 Screws .6. Remove the LAN AUX Antenna PCB.7. Remove the 2 Screws .8. Remove the WWAN AUX Antenna PCB.9. Remove the Pen10. Remove the two Screws .11. Remove the Pen Holder.Screws : DFHE5025XAScrews : DRHM5025YAAntenna CoverTablet Latch CoverLCD Rear CaseAntenna CoverLCD CableHolderSheetCableHolderCableHolderCableHolderPlateCable HolderPlateCableHolderPlateLCDHingeInverter CaseTapeInverter PCBConnectorConnectorLCD UnitTS PCBConnector(CN901)Connector (CN900)