- 6 -WARNING:• Do not use other than the Panasonicbattery packs that are designed for use withthis rechargeable tool.• Panasonic is not responsible for anydamage or accident caused by the use ofrecycled or counterfeit battery pack.• Do not dispose of the battery pack in a fire,or expose it to excessive heat.• Do not drive the likes of nails into the batterypack, subject it to shocks, dismantle it, orattempt to modify it.• Do not allow metal objects to touch thebattery pack terminals.• Do not carry or store the battery packin the same container as nails or similarmetal objects.• Do not charge the battery pack in a high-temperature location, such as next to a fireor in direct sunlight. Otherwise, the batterymay overheat, catch fire, or explode.• Never use other than the dedicatedcharger to charge the battery pack.Otherwise, the battery may leak, overheat,or explode.• After removing the battery pack fromthe tool or the charger, always reattachthe pack cover. Otherwise, the batterycontacts could be shorted, leading to a riskof fire.• When the Battery Pack Has Deteriorated,Replace It with a New One. Continueduse of a damaged battery pack may resultin heat generation, ignition or batteryrupture.II. ASSEMBLYAttaching or RemovingSocket1. Attaching Socket1) Remove the rubber ring and pin.rubber ringpingroove2) Attach the socket putting each holes.3) Attach the rubber ring and pin in reverseorder of 1).NOTE:Attach socket firmly by using pin andrubber ring.Retainer ring is only for temporaryfixing.2. Removing Socket1) Remove the rubber ring and pin.rubberring pin