Panasonic A500 Operating Instructions Manual

Also see for A500: Operating instructions

Contents

Panasonic A500 Operating Instructions Manual Manual pdf 73 page image

70ApplicationsInfraredBy using the Infrared connection with another A500 or with other devices with aninfrared port, you can transfer data between the devices.Preparing for Infrared connection¾Place the A500 and another device with an Infrared port within the effectiveInfrared connection range of each other.¾There must be no obstruction between the two communicating devices.¾The Infrared ports of both devices must point at each other.¾If you use a PC, you need to set up an Infrared connection on the PC.(Example: Start > Settings > Control Panel > Infrared > Options tab > EnableInfrared Communication)Sending dataThe types of data you can send are: Contacts, Pictures and Sounds in My Media.Ensure that the Infrared ports of your A500 and the second phone or device arepointing at each other with no obstructions in between.Setting InfraredYou need to activate Infrared before receiving data.From Infrared menu4 On or Off < / ASending pictures and soundsFrom Idle display1 <2 0 My Media < / A3 4 Pictures or Sounds < / A4 4 required item < / A5 4 select data to send A6 4 Send by Infrared < / ASome downloaded files may be protected under copyright laws. These filesshould not be sent.NOTE When Infrared is set to on, “ ” appears on the display. If Infrared isunused for 10 minutes or the phone is once switched off, it isautomatically set to off and “ ” disappears.ApplicationsInfraredIf you try to senddata that cannotbe forwarded orsaved, an errormessage will bedisplayed.