6.2 Sending Operation6.2.2 Contents of Sent DataStrings data sent by the GPSEND instruction are converted into ASCII text and saved in agiven data register. Sent data table Once the sent data are converted into strings data using the SSET instruction, the No. ofcharacters is saved in the header area. The sent data are saved starting with lower bytes ofthe subsequent address.Strings of the No. of bytes specified by GPSEND instructionare sent, in ascending order from lower bytes.DT100H42(B) H41(A)H44(D) H43(C)----- H45(E)----- -----DT101DT102DT103DT104After executing SSET instruction, the No. of characters is set.U5KEY POINTS The start code and the end code specified in the configuration menu areautomatically added to the sent data. Do not include the start code or theend code into sent data. The maximum volume of data that can be sent is 4,096 bytes. If the startcode is set to valid, the maximum size is 4,096 bytes including the startcode and the end code. It is also possible to send binary data.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
