Panasonic AG-DVC20P Operating Instructions Manual

Also see for AGDVC20P - 3 CCD DV CAMCORDER: Operating instructions Operating instructions

Panasonic AG-DVC20P Operating Instructions Manual Manual pdf 13 page image

Before using13Turning the camera onWhen the camera is turned on with the lens cap fitted, theautomatic white balance adjustment may not function properly.Please turn the camera on after removing the lens cap.ª How to turn on the power1 Set the [OFF/ON] switch to [ON].≥The power lamp lights up.ª How to turn off the power1 Set the [OFF/ON] switch to [OFF].≥The power lamp goes off.Selecting a mode1 Set the mode switch to [CAMERA] or [VCR].[CAMERA]: Tape recording modeUse this when you record the image on a tape.[VCR]: Tape playback modeUse this to play back a tape.Using the screen displayPress the [ENTER] button at the center of cursor buttons, andicons will be displayed on the screen. Each press switches thedisplay as follows depending on the mode.(In the Tape playback mode, the icons will be automaticallydisplayed on the screen.)1) Tape recording mode([AUTO/MANUAL/FOCUS] switch is set to [AUTO])2) Tape recording mode([AUTO/MANUAL/FOCUS] switch is set to [MANUAL])3) Tape playback modeOFFONOFFONCAMERAVCR3 Tele-macro -22-4 Soft skin mode -22-2 Fade -22-1 Backlight compensation -21-3 Night view/0 Lux night view -21-4 Recording check -19-4 White balanceShutter speedIris or gain value-24-1 Select/Adjust -24-2 Select/Adjust -24-3 Playback/pause -26-4 Stop -26-2 Rewind (review playback) -26-1 Fast forward (cue playback) -26-