Panasonic AG-DVC20p Operating Instructions Manual

Also see for AGDVC20P - 3 CCD DV CAMCORDER: Operating instructions Operating instructions

Panasonic AG-DVC20p Operating Instructions Manual Manual pdf 33 page image

Others33OthersIndicationsVarious functions and the camera-recorder status are shown onthe screen.Basic indications: Remaining battery power0h00m00s00f: Time code3:30:45PM: Date/Time indicationRecording indicationsR0:45: Remaining tape time≥Remaining tape time is indicated in minutes. (When it reachesless than 3 minutes, the indication starts flashing.)SP: Standard Play mode(Recording speed mode) -19-LP: Long Play mode(Recording speed mode) -19-¥: Recording -19-; (Green): Recording pause -19-Fade out (when the DV terminal is connected); (Green flash): Standby mode; (Red): Fade out: Recording check -19-: Cinema mode -23-: Digital zoom -20-: Automatic mode -18-: Manual mode -23-, -24-, -25-MF: Manual focus -25-5k: Zoom magnification indication -20-: Backlight mode -21-: Image stabilizer -23-1/500: Shutter speed -25-F2.4: F number -25-6dB: Gain value -25-: Soft skin mode -22-: Tele macro -22-: Fade (White) -22-: Fade (Black) -22-: Color night view function -21-: 0 Lux night view function -21-: Zoom microphone -20-: Microphone sensitivity level -20-: Wind noise reduction -22-5: Sports mode (Scene mode) -23-: Portrait mode (Scene mode) -23-: Low light mode (Scene mode) -23-: Spotlight mode (Scene mode) -23-: Surf & snow mode (Scene mode) -23-: Auto white balance -24-: Indoor mode (recording underincandescent lamp) -24-: Outdoor mode -24-: White balance adjustment mode -24-: Blank search -19-Playback indications¥: Recording underway1: Playback -26-;: Pause -26-5: Fast-forward/Cue playback -26-6: Rewind/Review playback -26-D/E: Slow motion playback -26-;1/2;: Frame-by-frame playback -26-2k5: Variable-speed search -27-: Repeat playback -26-A.DUB ¥: Audio dubbing -30-A.DUB ;: Audio dubbing pause -30-: Blank search -19-12bit, 16bit: Audio recording mode -32-: Volume adjustment -26-Warning/alarm indicationsIf any one of the following indications lights up or flashes,please check the camera-recorder.Confirmatory indicationsY: A cassette with the accidental erasure prevention sliderplaced in the [SAVE] position is inserted.No cassette is inserted.[--]/0:The built-in battery is low. -15-°: The warning/alarm indication appears when you recordyourself. Turn the LCD monitor towards the viewfinderand check the warning/alarm indication.REMOTE:An incorrect remote control mode has been selected. -17-2END:The tape came to the end during recording.:: The video heads are dirty. -36-Textual indications3DEW DETECT/3EJECT TAPE:Condensation has occurred. Take out the cassette andwait for a while. It takes some time until the cassetteholder opens, but this is not a malfunction. -36-LOW BATTERY:The battery is low. Recharge it. -10-NO TAPE:No tape is inserted. -12-TAPE END:The tape came to the end during recording.CHECK REC TAB:You are attempting to record pictures on a tape with theaccidental erasure prevention slider placed in the [SAVE]position.You are attempting audio dubbing or digital dubbing on atape with the accidental erasure prevention slider placedin the [SAVE] position.CHECK REMOTE MODE:An incorrect remote control mode has been selected. Thisis only displayed at the first operation of the remotecontrol after powering-on. -17-WRONG TAPE FORMAT:You are attempting to play back a tape section that hasbeen recorded with a different TV system. This cassette isincompatible.UNABLE TO A.DUB (LP RECORDED):Audio dubbing cannot be performed because the originalrecording was in LP mode.UNABLE TO A.DUB:You are attempting to perform audio dubbing on anon-recorded tape.COPY PROTECTED:Images cannot be recorded correctly because themedium is protected by a copy guard.NEED HEAD CLEANING:The video heads are dirty. -36-PUSH THE RESET SWITCH:An irregularity in the equipment has been detected.Pressthe reset button (-8-). This may solve the problem.You connect a device except for the DV format to the DVterminal. Pull out the DV cable, and press the reset button(-8-).CHANGE TO MANUAL MODE:You are attempting to select the item on the [SCENE MODE]when the [AUTO/MANUAL/FOCUS] switch is set to [AUTO].REVERSE THE LCD MONITOR:At the time of 0 Lux night view mode, when LCD monitoris not reversed, it displays. When the LCD monitor isrotated by 180° towards the lens, the brightness of theLCD monitor cannot be adjusted.CINEMAAUTOMNLEIS0LuxZOOMAWB