INF-17Zoom control voltage (V)Zoom speed (sec.)Measuring point of zoom control voltage7. CAMERA REMOTEThe operation of zoom operation and record start/stop can be remotely controlled by connecting a remote controllerwith ZOOM S/S remote jack.The operation of focus and iris operation can be remotely controlled by connecting a remote controller withFOCUS/IRIS remote jack.NOTE: CAMERA remote control is only effective in the CAMERA mode.7-1. ZOOM S/S REMOTEPlease refer to below indicated specification, When external remote is checked.Terminal (refer to figure A) ContentsA Record start/stop inputB Zooming control inputC GND7-1-1. Record start / stop inputEvery time A terminal connects with the GND, it repeats recording and a recording stop.7-1-2. Zooming control inputWith the voltage to input to the B terminal, the zoom speed changes. As for the relation between the zoom controlvoltage and the zoom speed, it is as shown in the following.Relation between the zoom control voltage and zoom speedFigure BNOTE:The control voltage and thezoom speed, which are shownbelow are a reference value.Because there is a littledifference, see as the referencedata.Figure AEquivalent circuit of ZOOM S/S REMOTE jack