Panasonic AG-HMX100E Operating Instructions Manual

Also see for AG-HMX100: Manual Brochure Manual Operating instructions Brochure

Contents

Panasonic AG-HMX100E Operating Instructions Manual Manual pdf 28 page image

28Basic OperationTo set the operation of AUX and MICfadersSet [AUX/MIC] to [PAIR] or [SEPA.] (separate) using therotary 3 control. The operation of each fader varies with thesetting as described in the table shown below.Setting AUX fader MIC faderPAIR L and R channels ofAUX input sourceL and R channels ofMIC input sourceSEPA. L channel of AUX (orMIC) input source*1R channel of AUX (orMIC) input source*1*1 To adjust the audio level of the microphone, operate thefader while holding down the SHIFT key.[INT VIDEO] Menu(Internal Video Setting) ScreenWhen the INT VIDEO button is pressed, the [INT VIDEO]menu screen appears as shown below.This menu is used to set the internal video signal built inthis unit.During color setting in the [INT VIDEO] menu, the joystickand rotary Z control are in the color setting mode.The color set from this menu is indicated in the internalvideo display area.BACK PATTERN GRADEMODEWHITE H1 0WRITEFRAME1MATTEBAR2255COLORLEVELFRAMEPAGECOLORMEMORYWASHEVENTINT VIDEO GRADE POS 80ME TIME PATTERN INT00 E 1:00 F 3001 BLUEPB 128Y 196PR 128WHTYELWCYANGRENMGTREDBLUEBLKCST 1CST 2CL BRST # *1MV # *1*1 # stands for a numeric value. (The maximum value varieswith the memory size (the number of frames) set in the[MEMORY] submenu of the [SETUP] menu.)To set the audio output format and the operation of audio fadersSet [SOURCE] to [CP PAIR], [BUS SEP1], [BUS SEP2], [12 PAIR], or [12 SEPA.] using the rotary 2 control.The following table shows the output method and audio input sources assigned to the faders for each setting.Setting Output Method SOURCE 1/5 Fader SOURCE 2/6 Fader SOURCE 3/7 Fader SOURCE 4/8 FaderCP PAIR Sound output of theselected input sourceL and R channels of source1 (or 5)L and R channels of source2 (or 6)L and R channels of source3 (or 7)L and R channels of source4 (or 8)BUS SEP1 L channel of A/PROGsourceR channel of A/PROGsourceL channel of B/PRESETsourceR channel of B/PRESETsourceBUS SEP2 When AB bussystem is selectedL channel of A bus source R channel of A bus source L channel of B bus source R channel of B bus sourceWhen Program/Preset system isselectedPreview button lighted: Lchannel of PROG sourcePreview button flashing: Lchannel of PRESET sourcePreview button lighted: Rchannel of PROG sourcePreview button flashing: Rchannel of PRESET sourcePreview button lighted: Lchannel of PRESET sourcePreview button flashing: Lchannel of PROG sourcePreview button lighted: Rchannel of PRESET sourcePreview button flashing: Rchannel of PROG source12 PAIR Fixed to sound ofinput sources 1 and 2.L and R channel of source 1 L and R channel of source 2 Not available Not available12 SEPA. L channel of source 1 R channel of source 1 L channel of source 2 R channel of source 2