Panasonic AG-HPX170P Operating Instructions Manual

Contents

Panasonic AG-HPX170P Operating Instructions Manual Manual pdf 72 page image

7Thumbnail operations (continued)When deleting items of LOCATION (shootinglocation) in SHOOT, items cannot be deletedindependently. Make ALTITUDE blank, and theother items (LONGITUDE/LATITUDE) are alsodeleted.Metadata of a clip with the incomplete clipindicator cannot be edited. To edit metadata of aclip recorded in multiple P2 cards, insert all theP2 cards containing video data of the clip beforestarting editing.If MEMO contains 100 or more characters, itcannot be edited.Uploading the metadata (META DATA)You can perform any of the following operations. Ifnecessary, make preparations prior to undertakingthe operations.Loading the metadataInsert the SD memory card on which themetadata is recorded into the unit. (For details oncreating the metadata, see page 57.)Selecting whether to record the metadata onthe P cardChanging recording method of USER CLIPNAMEInitializing the metadata inside the unitConfirming and editing camera-recordermetadata1 On the thumbnail screen, press the MENUbutton.A menu now appears. (Page 64) Push the Operation lever in the e or rdirection to select META DATA and press it(or push it in the q direction) again.THUMBNAILOPERATIONPROPERTYMETA DATAEXIT•••• Push the Operation lever in the e or rdirection to make a selection and press itagain.THUMBNAILOPERATIONPROPERTYMETA DATAEXITLOADRECORDUSER CLIP NAMEINITIALIZEPROPERTYEXITLOAD:Select this to load the metadata recorded onthe SD memory card into the unit.When the Operation lever is pressed withoperation moved to LOAD, the metadataon the SD memory card will be displayed.Therefore, press the Operation lever again.Select YES to load the metadata or NO tocancel the loading, and press the Operationlever.If characters other than single-bytealphanumeric characters are used in themetadata file name to be loaded, they aredisplayed as “∗”.RECORD:Select this to set whether to record themetadata to be loaded into the unitsimultaneously on a P2 card.Select ON to record the metadata or OFFto cancel the recording, and press theOperation lever. The factory setting for thismode is OFF.USER CLIP NAME:The USER CLIP NAME recording methodis selectable. Please refer to Appendix(Page 124).INITIALIZE:Select this to initialize the metadata whichhas been recorded in the unit.Select YES to initialize the metadata or NOto cancel the initialization, and press theOperation lever. All the settings including theON or OFF setting for RECORD are nowcleared.•