Shooting295SING3$3$(#MEMORYCARDSYou can use SD and SDHC memory cards (theterm “SD memory card” is used for both hereafter)TOSAVEANDLOAD3#%.%ÚLESAND53%2ÚLES ANDto upload clip meta data. (Page 55)Installing and removing the SDmemory cardInstallation1 ,IFTUPTHEVIEWÚNDER PRESSTHESIDEOFTHEcard slot cover (A), and slide the cover (B)to open it.2 Insert the card while making sure it isoriented in the proper direction.2Access lamp3 Close the card slot cover.Removal1 Open the card slot cover, and check thatthe access lamp is not lit.2 Press the card further into the unit, graspthe card, and then remove.3 Close the card slot cover.Formatting SD memory card1 Set the POWER switch to ON. (Page 19)2 Press the mode button and set it to MCRmode (the MCR lamp lights).3 Press the MENU button.4 On the menu, select OPERATION, FORMATand then SD CARD. (Page 68)Select EXIT to cancel the formatting.•THUMBNAILOPERATIONPROPERTYMETA DATAEXITDELETEFORMATREPAIR CLIPRE-CONNECTIONEXCH.THUMBNAILEXITSLOT1SLOT2SD CARDEXIT5 3ELECT9%3ONTHECONÚRMATIONSCREENThe selected SD memory card is formatted.You can also format from the SD CARDFORMAT option on the CARD FUNCTIONSscreen. (Page 110)7ITH3$(#CARDS +"OFCAPACITYWILLHAVEbeen used.Cautions in using SD memory cards3$MEMORYCARDSUSEDWITHTHE!' (080should conform to SD or SDHC standards. Besure to format cards using the AG-HPX170P.3$MEMORYCARDSWITHTHEFOLLOWINGCAPACITYCANbe used for the AG-HPX170P.SD (from 8 MB to 2 GB):-" -" -" -" -"256 MB 512 MB 1 GB 2 GBSDHC (4 GB to 16 GB):4 GB 8 GB 16 GBFor the latest information not available in theOperating Instructions, visit the P2 Support DeskATTHEFOLLOWING7EBSITESHTTPSEWWPAVCPANASONICCOJPPRO AV/SD memory cards must not be used or stored inANENVIRONMENTWHERETHEYMAYBE%XPOSEDTOhigh temperatures/humidities;%XPOSEDTOWATERDROPLETSORElectrically charged."ESUREALWAYSCLOSETHECOVERWHENUSINGANSD memory card.See also “Checkpoints for using memory cards”on page 122.•••••••