Panasonic AG-HPX250EJ Instruction Manual

Also see for AG-HPX250EJ: Electrical Adjustment

Panasonic AG-HPX250EJ Instruction Manual Manual pdf 24 page image

E-23The remote controlInsert the battery1 Push the catch in the direction shown byarrow 1 to remove the holder.2 Insert the battery with the “+” marked sidefacing up.3 Return the holder to its original position.• When the battery (CR2025) has run out, replaceit with a new one. (The battery lasts about oneyear, depending on the frequency of use.) If theremote control unit fails to work even when itis operated near the camera-recorder’s remotecontrol sensor, the battery has run out.• Keep the battery out of the reach of children.Remote control setupWhen using two camera-recorders simultaneously,set this camera-recorder and the remote control toeither “operation mode 1” or “operation mode 2”so the remote control does not operate the wrongcamera-recorder by mistake.Setting• Wireless remote controlPress the operation buttons STOP () and STILLADV ( ) at the same time to set the remotecontrol unit for use in “operation mode 1”.Alternatively, press the STOP () and STILL ADV( ) buttons at the same time to set the remotecontrol unit for use in “operation mode 2”.When the battery in the remote control unit isreplaced, the remote control unit is set for use in“operation mode 1”.• Camera-recorderIn the setup menus, OTHER FUNCTIONSscreen, REMOTE, set to 1 or 2. (Page 148 of Vol. 2)If different settings are used for the camera-recorder and remote control unit, “REMOTE” lightsin red on the viewfinder and LCD monitor.Operationmode 2Operationmode 1