Panasonic AG-HPX500 Menu Information

Also see for AG-HPX500: Brochure & specs Operating instructions Service manual

Contents

Panasonic AG-HPX500 Menu Information Manual pdf 14 page image

119Setup menu listChapter 7 Menu OperationsOTHER FUNCTIONS screenItem Description of settings (Items in bold are factory settings.)USER FILESaves users files on, loads users files from the storage area of the camera (EEPROM), and initializesthe storage area.●----: Off (no operation)●LOAD: Loads the settings in a user file previously stored on the storage area.●SAVE: Saves the user file updated settings on the storage area.●INITIAL: Returns the user settings in the user file to their factory defaults.• After a LOAD or INITIAL operation, turn the POWER switch off and then back on again to make thenew settings available.• An INITIAL operation does not change the setting of the menu option TIME ZONE.1394CONTROLSets the control method for backup recording using a backup unit connected to the 1394 terminal.●OFF: The backup unit is not controlled.●EXT: The backup unit can be controlled by the START/STOP button. The images shot by the camerarecorder are recorded by the backup unit. Note that the camera recorder does not record them.●BOTH: The images shot by the camera recorder are recorded by both the camera recorder andbackup unit.●CHAIN: When the camera recorder’s media approaches its end during shooting, the backup unit inthe recording standby mode automatically starts recording images.1394CMD SELSets how the START/STOP button works for the backup unit.●REC_P: This switches between recording and pause.●STOP: This switches between recording and stop.If the backup unit does not have a rec pause function, select STOP.PC MODESelects the terminal for data transfer. (You cannot select USB and 1394 at the same time.)●USB DEVICE: Mode for sending files using the USB connector.●1394 DEVICE: Mode for sending files using the 1394 connector.●1394 HOST: Mode for copying files from the P2 card onto an external hard disk drive using the 1394connector.ACCESS LEDEnables or disables the access LED. The L-SIDE is the left side as seen from the lens (the P2 card slotside).●OFF L-SIDE: OFF R-SIDE: OFF●SLOT SIDE L-SIDE: ON R-SIDE: OFF●LCD SIDE L-SIDE: OFF R-SIDE: ON●BOTH L-SIDE: ON R-SIDE: OFFALARM Turns the alarm function on and off.●ON, OFFSAVE LEDSets the SAVE lamp operation.●SAVE: Lights when the SAVE/STBY switch is set to SAVE. Off during recording.●P2CARD: Blinks when a warning message appears to indicate that there is little space left on a P2card.CLOCK SET Sets the camera-recorder’s calendar.TIME ZONEAdds to or deducts from GMT the time value of –12:00 to +13:00 in 30-minute steps. (As an exception,you can set +12:45.) (Page XX)●+9:00LANGUAGESets the Menu language.●ENGLISH●JAPANESE●CHINESEGL SELECT Determines which signal to lock on to.●SDI, COMPOSITE, COMPONENTGL PHASE Determines whether to perform a 90H shift (ON) or not (OFF).●ON, OFFH PHASE Adjusts the phase.●–511 ~ 0 ~ +511SYSTEM FREQ Switches between NTSC and PAL.●59.94 Hz, 50 Hz

/ 15

Related manuals for Panasonic AG-HPX500