Panasonic AG-HPX500 Service Manual

Also see for AG-HPX500: Brochure & specs Operating instructions Menu information

Contents

Panasonic AG-HPX500 Service Manual Manual pdf 41 page image

INF-316-5. Write UID screenThis PC EVR software has Write UID screen.< How to display the Write UID screen. >1. Select “SYSCON(S)” section after start up the PC EVR software, and click “OK” button.2. Select “Write UID” in “Tools(W)” menu, Write UID screen will appear on screen.< Function of the Write UID screen. >The following display and the setup can be performed on a Write UID screen.● Setting and display of UID information.● Display of Serial No..6-5-1. UID displayClicking “Read” button as shown in figure, UID information is displayed. The UID information can be confirmedalso with the DIAGNOSTIC menu and Setting Tool screen on PC EVR software. Please refer to item “3-1-4. 1394UID display” (page INF-8) and item “6-4-5. 1394 UID Display” (page INF-28).6-5-2. UID settingClicking “Write” button as shown in figure, UID information is write to camera recorder (The operation of powerOFF/ ON is required to save the number into the camera recorder). Please refer to item “8. UID WritingProcedure” (page INF-39) about setting procedure.6-5-3. Serial No. displayClicking “Read” button as shown in figure, Serial No. is displayed. The Serial No. can be confirmed also with theGUI service menu. Please refer to item “4-4. SYSTEM INFO” (page INF-14).6-5-4. Power supply rebootClicking “Re-Boot Power” button, the power of camera recorder automatically OFF and ON.For UIDFor Serial No.