25VQT1F36Before usingª Install a button-type batteryInstall the supplied button-type battery in theremote control before using it.1 While pressing the stopper A,pull out the battery holder.2 Set the button-type battery withits (i) mark facing upward andthen put the battery holder backin place.Concerning the button-type battery≥When the button-type battery runs down,replace it with a new battery (part number:CR2025). The battery should normally lastabout 1 year, however this depends on howfrequently the unit is used.≥Keep the button-type battery out of the reach ofchildren.ª Remote control usable rangeThe distance between the remote control and theunit’s remote control sensor A: Within approx.5 m (16 feet)Angle: Approx. 10o up and 15o down, left, andright≥The remote control is intended for indooroperation. Outdoors or under strong light, theunit may not operate properly even within theusable ranges.CAUTIONDanger of explosion if battery is incorrectlyreplaced. Replace only with the same orequivalent type recommended by themanufacturer. Dispose of used batteriesaccording to the manufacturer’s instructions.Replace battery with Panasonic PART NO.CR2025 only. Use of another battery maypresent a risk of fire or explosion.Caution: Battery may explode if mistreated.Dispose of used battery promptly. Keep awayfrom children.Do not recharge, disassemble or dispose of infire.AA
