Panasonic AG-MSU10 Operating Instructions Manual

Also see for AG-MSU10: Brochure

Contents

Panasonic AG-MSU10 Operating Instructions Manual Manual pdf 42 page image

Interface BoxInterface Box SetupInstalling an SSD in the AG-MBX10G Interface Box allows the user to copy data recorded on a P2 card cam-era-recorder to the SSD.USB bus power operation makes use of the AC adapter unnecessary. In addition to a USB 2.0 connection,the unit also provides a high-speed eSATA connection.Installing an SSD (SolidState Drive)1 Remove the five screws in the interfacebox and remove the top lid.Use a No. 0 Phillips screwdriver to remove the screws.2 Slide the SSD into the box while takingcare to align the connectors on the SSDwith those in the box. NOTE:• Do not insert the SSD at an angle as the connec-tors could be damaged.3 Secure the SSD using the four supplied3.0 mm screws.Use a No. 2 Phillips screwdriver to secure the screws.4 Close the top lid and secure the lid usingthe five 2 mm screws removed in step 1.Use a No. 0 Phillips screwdriver to secure the screws. NOTE:• Be sure to use a Phillips No. 0 screwdriver for the lidscrews and a Phillips No. 2 screwdriver for the SSDsecuring screws.Attaching the Silicone JacketWhen using the interface box as a stand-alone ex-ternal device, slip it into the supplied silicone jacketto protect its connectors.Back sideBack sideBack sideBack sideBack sideBack sideConnectorsSSD