- 10 -MAIN MENU 1/2 screenThe items on this menu cannot be set using the SET UP dial.They are set using the controls on the front panel.11 SYNCRO SCAN screenThis screen is used to make synchro scan settings.# < SYNCHRO SCAN >SYNCHRO SCAN : 1/60.822 VR DATA screenThis screen displays the setting values for theadjustment knobs on the front panel.# < VR DATA >MASTER PED : +000MASTER DTL : +00MASTER GAMMA : 0.45KNEE POINT : 090%KNEE SLOPE : 13R GAIN : +000B GAIN : +000R PEDESTAL : +000B PEDESTAL : +000# < MATRIX >MATRIX TABLE : AMATRIX R-G : +00MATRIX R-B : +00MATRIX G-R : +00MATRIX G-B : +00MATRIX B-R : +00MATRIX B-G : +0033 MATRIX screenThis screen is used to select the camera’s matrixsettings.44 DTL SETTING screenThis screen is used to make detail settings.# < DTL SETTING >H.DTL LEVEL : 06D.DTL LEVEL : 13DTL CORING : 03H.DTL FREQ. : 04DARK DTL : 00LEVEL DEPEND. : 00BLACK STRETCH : OFFMATRIX TABLE : OFF# < ADDITIONAL DTL >C DTL COMPE. : OFFCHROMA DTL : 0KNEE APERTURE : ONSLIM DTL : OFFCORNER DTL : OFFDTL GAIN(+) : +00DTL GAIN(-) : +16DTL CLIP : 00H.DTL LINE MIX : 1H55 ADDITIONAL DTL screenThis screen is used to select the camera’s specialdetail settings.66 SKIN TONE DTL screenThis screen is used to select the camera’s skin tonedetail settings.# < SKIN TONE DTL >SKIN TONE DTL : OFFSKIN TONE HUE : 103SKIN TONE LEVEL : 25SKIN TONE WIDTH : 15SKIN TONE CORING : 05SKIN TONE ZEBRA : OFFThe SKIN TONE ZEBRA setting automatically switches toOFF when the SKIN TONE DTL submenu is opened,regardless of whether the previous setting was ON or OFF.
