Panasonic AJ-CA900 Operation Instructions Manual

Contents

Panasonic AJ-CA900 Operation Instructions Manual Manual pdf 6 page image

- 5 -Parts and their functions1 Microphone intercom switch (MIC)Used to switch the intercom line between the ON, OFF,and PTT settings. (PTT: Audio transmission continues aslong as the switch is held down.)2 Intercom level knob (LEVEL)This knob is used to adjust the intercom reception volumelevel.3 Program level knob (PGM)This knob is used to adjust the intercom PGM volume level.4 Program line switchThis switch controls the program line multiplexed on theintercom line. It has two positions: ON and OFF.AJ-Camera AdapterMIC LEVELINCOM PGMONOFF ONOFFPTTDIGITAL TRIAX1 2 3 4Left side3 Triax connectorThis connector is used to connect to the base station (AJ-BS900P) using a triax cable.1 Prompter video output (PROMPT OUT)The prompter video signal input to the base station (AJ-BS900P) is output from this jack.2 Return video output (RET OUT)The return video signal (either RET1 or RET2) input to thebase station (AJ-BS900P) is output from this jack.RET-1 or RET-2 is selected by operating the return selectbutton (see page 4).PROMPTOUTRET OUTPROMPTOUTRET OUT123Right side