Panasonic AJ-D215P Operating Instructions Manual

Also see for AJ-D215P: Operating instructions Operating instructions

Contents

Panasonic AJ-D215P Operating Instructions Manual Manual pdf 66 page image

– 66 –DC IN (XLR, 4P)LENS (12P)DVCPRO interface connector (option):Complies with IEEE 1394-1995 standardOTHER[CONNECTORS]FRONT MIC: Phantom +48V (built-in microphone), –60 dBu, balanced, 3 kΩ(–60, –50 or –40 dBu setting possible on menu)AUDIO IN CH1/CH2 (XLR, 3P):–60, –50 or –40 dBu setting possible on menu, balanced, 10 kΩInternal DIP switch setting:Phantom 48V output possibleline (–6/0/+4 dBu) switchableINPUT[ACCESSORIES]1.5˝ viewfinderMicrophone (attached to main unit)Battery holder (attached to main unit)Battery mounting connector and screw supporting Sony-made battery (NP-1B)AUDIO OUT CH1/CH2 (Phono pin jack):–6 dBu, unbalanced, low impedance outputHEADPHONE OUT: Stereo mini jackVIDEO OUT (BNC): 1.0 V P-P, 75 ΩS-VIDEO OUT: Y signal = 1.0 VP-P, 75 ΩC signal = 0.286 VP-P (burst), 75 ΩOUTPUT[VTR] The video and audio performance specifications apply for a tape which has been recorded onthis unit and played back on a standard player (ANALOG COMPONENT OUT).Tape speed: 33.8201 mm/secRecording/playback time:Approx. 184 min. ( using AJ-5P92LP)FF/REW time: Less than 8 min. (using AJ-5P92LP)Video signal band: Brightness = 0 Hz to 5.75 MHz, +1.0 dB/–3.0 dBS/N ratio: 55 dBLinearity: Less than 2%Y/C delay: Within 30 nsAudio sampling frequency:48 kHz (synchronized with video)Quantizing: 16 bits/sampleFrequency response: 20 Hz to 20 kHz, +1.0 dB/–1.5 dB (at reference level)Distortion: Less than 0.2% (at 1 kHz, operating level)Crosstalk: Less than –65 dB (between channels, at 1 kHz)Wow and flutter: Below measurable limitsHeadroom: 20 dBFor AJ-5P92LP cassette tapes, use a VTR supporting DVCPRO (25Mbps) 184 minute tapes.

/ 68

Related manuals for Panasonic AJ-D215P