– 13 –This chapter describes the checks on the disk-related settings which are conducted on thestartup screen of Windows NT, the operating system used by the unit, and the inspectionsconducted on the AV disks to verify whether they can be used by this system.The inspections described in this chapter are conducted after the Windows NT startup screenappears normally after the power to all the units and devices has been turned on.For details on the checks and inspections conducted prior to the appearance of the WindowsNT startup screen, refer to Chapters 1 and 2 of this manual.3-1. Checking the disk settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133-2. Checking the AudioPool, VideoPool & TitlePool directories . . . . . . . . 153-1. Checking the disk settingsThe checks in this section are performed after the series of checks describedin the previous chapter have been completed with no errors found.When the sequence of power startup steps is completed and the waiting-to-log-on dialog box has appeared on the screen, follow the instructions in thebox and complete the logging on procedure for Windows NT.On the startup window after Windows NT log-on, check the disk settings inthis section using the Disk Administrator which is a Windows NTmanagement tool.Before starting the actual procedure, you will find it easier to perform thechecks if you quickly glance through items C-1–C-3 (pages 45, 46) ofAppendix C how to use Disk Administrator provided with Windows NT andunderstand how the settings of the parts corresponding to the items to bechecked in this section are displayed.If items with wrong settings have been detected as a result of conducting thechecks, refer to the explanations with the ¬ marks in the sections concernedin Appendix C and to the “Troubleshooting” section in the OperatingInstructions. (Refer to pages 20–27 of Operating Instructions.)Chapter 3 Disk-related configuration checks