– 33 –VIDEO OUT SD SET UP COMPOSITE menuKeyF1F2–F4F5F6F7F8F9F10F11F12F13Key designationCOMB FIL°1For controlling the combfilter.——SYS SCFor adjusting the systemsubcarrier.SYS HFor adjusting the system Hphase.INTERP.InterpolationEXIT——7.5%STUPFor adding 7.5% setup tothe composite output.LINE BLK°2STATE——DescriptionSelects whether the analog composite output signals are to bepassed through the comb filter.ON: The signals are passed through the filter and output.OFF: The signals are not passed through the filter.Adjusts the system subcarrier of the composite output.When this key is pressed together with the F key, the white-on-black display (VAR MODE) is established, and the systemsubcarrier can be adjusted using the ADJUST control.Adjusts the system H phase of the composite output.Adjusts the system H phase of the composite output.When this key is pressed together with the F key, the white-on-black display (VAR MODE) is established, and the system Hphase can be adjusted using the ADJUST control.The system H phase is adjusted in sample increments. n0.5Hj858 to i858 (with 480/59.94i format)j864 to i864 (with 576/50i format)Initiates vertical interpolation during AT playback to reduce thevertical movement of the playback images.AUTO: Automatically initiates interpolation in the JOG or VARmode.OFF: No interpolation.Returns the VTR to the VIDEO OUT SD menu screen.Selects whether to add 7.5% setup to the composite output.(This setting takes effect with NTSC output signals only; Thissetting is not displayed with PAL output signals.)ON: 7.5% setup is added.OFF: 7.5% setup is not added.For transferring to the video output line blanking menu.NTSC: Lines 10 to 21.PAL: Lines 8 to 22.Transfers the VTR to the VIDEO OUT SD SET UP CMPSTSTATE menu screen.°1This item does not function in the 1080/50i mode.°2In a mode other than the 525i (480/59i) mode, this adjustment is possible only when the AJ-UDC3700P HD-SDformat converter board (optional accessory) has been installed.