Panasonic AJ-HPX3000 Menu Information

Also see for AJ-HPX3000: Operating instructions Brochure & specs Procedure

Contents

Panasonic AJ-HPX3000 Menu Information Manual pdf 6 page image

159Menu : Menu Description TablesMenuThe ____ in the Adjustable Range column indicates thepreset mode.Menu Description TablesSYSTEM SETTINGSYSTEM MODEItems/Data SavedAdjustableRange RemarksSYSTEMMODE1080-59.94i1080-50i480-59.94i576-50iFor setting the system frequency and therecording format of the unit.When this item is switched, turn “OFF”the POWER switch on the unit and thenturn it “ON” again.Notesz When the remote control unit (AJ-RC10G) is connected, this item is notdisplayed.To switch this item, operate the mainunit independently.z When the time code is in free runmode and a change is made to theSYSTEM MODE menu option, thetime may not be correctly recorded.After turning on the camera-recorder,check the time code and make achange to the setting if required.z When USB DEVICE mode is selected,no change can be made to this option.– C U F –REC SIGNAL CAMVIDEO1394SDISelect video input signals.CAM: Record the signal from thecameraVIDEO:Record the signal from theGENLOCK IN connector (In SDmode only1394: Record the signal from the 1394input connectorSDI: Records input to the SDI INconnector (optional).Notesz In Native mode for the AVC-Intra andDVCPRO HD, 1394 cannot beselected.z After the power has been turned OFF,this setting defaults to CAM when thepower is turned ON again.z In order to select VIDEO andsynchronize video signals input to theGENLOCK IN connector (VBS) withthe unit, set the GENLOCK item of[ GENLOCK ] (page 163) to "EXT".– C U F RCAMERAMODE(1080-59.94i/480-59.94i)60i30P24P24PA(1080-50i/576-50i)50i25PFor setting the video system forshooting.NoteIn AVC-Intra mode, 24PA cannot beselected.– C U F RASPECT 16:94:3Select the aspect ratio for recording. (InSD mode only16:9: Record in <16:9> aspect ratio.4:3: Record in <4:3> aspect ratio.– C U F RItems/Data SavedAdjustableRange RemarksSCANREVERSEOFFONSpecify whether image correction isused or not, when an anamorphic lensor a lens for film applications is used.OFF: Images are not corrected.ON: Images are corrected. The verticaland horizontal orientations areinverted.– C U F RVF TYPE HDSDSpecify the type of viewfinder to beattached to the camera-recorder.– C U F RREC MODE AVC -I 100AVC -I 50DVCPRO HDDVCPRO50Select the recording mode.AVC-I 100:Record in AVC-I 100 formatAVC-I 50:Record in AVC-I 50 formatDVCPRO HD:Record in DVCPRO HD formatDVCPRO50:Record in DVCPRO50 format. (In SDmode onlyNotesIf “1394” is selected in REC SIGNAL,AVC-I 100 and AVC-I 50 cannot beselected.– C U F RSETUP 0%7.5%ASwitch the setup. (For 480-59.94i only0%: Setup is switched to 0% for boththe camera output and therecording.7.5%A: Setup is switched to 7.5% for thecamera output and 0% for therecording.– C U F RPC MODESELECTUSB HOSTUSB DEV.Specify the operation mode of thecamera-recorder when an externaldevice is connected via USB.USB HOST:Sets the camera-recorder to the modethat allows an external hard disk driveto be connected.USB DEV.:Sets the camera-recorder to the USBdevice mode, which allows a PC to beconnected via USB 2.0 for use withP2 cards as mass storage.NoteWhen the PC MODE menu option is setto ON, no change can be made to thisoption.– – – F –PC MODE ONOFFUsed to enable or disable the mode thatallows the camera-recorder to beconnected to a PC or an external harddisk drive via USB 2.0.ON: Sets the camera-recorder to themode selected through the PCMODE SELECT menu option.OFF: Disables the PC MODE for normaloperation.NoteOnce the power is turned off, the optionis always set to OFF when the power isturned on next time.– – – F –