Panasonic AK-HC1800G Operating Instruction

Also see for AK-HC1800G: Parts list Operating instructions

Contents

- 4 (E) -ENGLISH Configuration example 4: Controlling the camera from theAW-RP655 or AW-RP555 controllerWhen installing the camera on the AW-PH650 outdoor pan/tilt head, refer to the operating instructionsof the AW-PH650.When placing the camera on the AW-PH650 and controlling it from the AW-RP655 or AW-RP555controller, select “4” as the PROTOCOL setting of the AK-HC1800G, and set the camera controlselector switch inside the housing of the AW-PH650 to “CB400.”When using G/L signals, select “DSUB” as the GEN-LOCK INPUT setting of the AK-HC1800G.Be absolutely sure to perform and check these settings prior to installation.To be locallypurchasedControllerAW-RP655 orAW-RP555MonitorPOWERSDIOUTRJ-45 relay adapter10BASE-T (UTPcategory 5) straightcableMULTIAC adapterAW-PS510A orAW-PS505AG/L inputOutdoorpan/tiltheadAW-PH650MonitorAK-HC1800GWhen mounting the camera on the pan/tilt head:Select “4” as the PROTOCOL setting.Select “DSUB” as the GEN-LOCK INPUT setting.AK-HC1800GWhen connecting this unitdirectly to the controller:Select “3” as the PROTOCOL setting.Set GEN-LOCK INPUT as required.AC adapterAW-PS510A orAW-PS505AAW-PH650Set the camera controlselector switch inside thehousing to “CB400”.When the AK-HC1800G, to which the motor drive lens is connected, has beendirectly connected to the AW-RP655 or AW-RP555 controller, zooming andfocusing can be controlled using the controller’s joystick.How to set up the system