Panasonic AK-HC3800 Review

Also see for AK-HC3800: Brochure

Contents

specifications

SpecificationsAK-HC3800 Studio Handy CameraPower Supply: 12 V DC (during external power supply operation)190 V DC (when CCU is connected)Power Consumption: 25 W (during external power supply operation,camera only)53 W (maximum power during external power supplyoperation when maximum power supplied for eachoutput connector while all accessories are connected)60 W (maximum power when CCU is connected andmaximum power supplied for each output connectorwhile all accessories are connected)Operating Temperature: –10 °C to 45 °C (14°F to 113°F)Preheating required at temperatures below 0°C (32°F)Storage Temperature: –20 °C to 60 °C (–4°F to 140°F)Operating Humidity: 10 % to 85 % (no condensation)Weight: Approx. 3.7 kg (approx. 8.16 lb)Dimensions (W x H x D): 135 mm x 260 mm x 367.5 mm(5-5/16 inches x 10-1/4inches x 14-7/16 inches)excluding protrusionsPickup Device: 2/3 type 2.2 million pixel IT, CCD x 3System: GBR pickup systemColor Separation Optical system:f/1.4 prismOptical Filter: ND: Clear, 1/4, 1/16, 1/64Lens Mount: Bayonet typeOutput standard: SMPTE 292MSensitivity: F11 (59.94 Hz)F12 (50 Hz)Horizontal Resolution: 1100 TV linesS/N: 60 dB or higherHorizontal Frequency: 33.716 kHz, 1125 line frame (59.94 Hz)28.125 kHz, 1125 line frame (50 Hz)Vertical Frequency: 59.94 Hz or 50 Hz, interlaceMIC Input: –60 dBu to 4 dBu (XLR 3-pin female x 2)Gain selected by camera menuIntercom: XLR 5-pin female x 1Input: -60 dBu to -20 dBuOutput: 100 mW max.HD SDI Output: BNC x 2 (HD SDI 1/HD SDI 2)HD signal = 0.8 V [p-p], 75 ΩThe HD SDI 2 signal output can be added to theregular images using the camera menu item settingand switched to the VF or RET image output.Prompter Output: BNC x 1, VBS signal = 1.0 V [p-p], 75 ΩDC OUT: 12 V, MAX. 1ARET CONTROL Terminal: Round 6 pin x 1VF: Round 20 pin x 1, D-Sub 29 pin x 1Power Switching: CCU, OFF, EXTUSER 1/2/3: Functions specified by menu items can be assigned tothe switch.RET A/B Selection: For selecting the return signalRET/PTT Switching: RET, PPTOutput Selection*1: CAM, BAR, TESTWhite Balance Mode*1: A, B, presetShutter Speed Selection*1: 59.94 Hz:1/48 (23.98p), 1/60 (23.98p, 29.97p), 1/100, 1/120,1/125, 1/250, 1/500, 1/1000, 1/1500, 1/200050 Hz:1/50 (25p), 1/60, 1/100, 1/125, 1/250, 1/500,1/1000, 1/1500, 1/2000Intercom: MIC ON/OFF, receiving level, or PGM levelMIC Setting: MIC power, MIC gain, MIC1 selection*1: When the CCU is connected, the selection functions cannot be used. Control isperformed from the ROP.* When IP connection, 1080/29.97sF, 1080/50PsF, 720/59.94p, and 720/50p format areused, you may need to update AK-HC3800 firmware. For details, see the Panasonicwebsite. http://pro-av.panasonic.net/AK-HCU200 Camera Control Unit (CCU)Power Supply: 100 V to 240 V AC, 50Hz/60 HzPower Consumption: 170 W (Without CAMERA connected: 32 W)Capacity for Supplying Power to a Camera:190 V DC, 0.6 AOperating Temperature: 0 °C to 40 °C (32 °F to 104 °F)Operating Humidity: 10 % to 90 % (no condensation)Dimensions (W x H x D): 424 mm × 88 mm × 400 mm(16-11/16 inches × 3-7/16 inches × 15-3/4 inches)Excluding protrusionsWeight: Approx. 6.6 kg (approx. 14.6 lb)Video Output: HD SDI/SD SDI: 4 lines(2 lines shared with picture monitor output*2)Analog composite: 1 line(1 line shared with picture monitor output*2)Return Input: HD SDI/SD SDI: 2 lines(switched depending on the setting)VBS: 1 linePrompter Input: 1 line, Analog compositeReference Input: 1 line (1 loop-through line)Black burst/tri-level*3Microphone Output: 2 lines (XLR, 3-pin, male), 0 dBm/600 ΩIntercom: XLR, 5-pin, femaleInput: –55 dBu to –10 dBuOutput: 100 mW (max.)COMMUNICATION: Intercom input/output: 2 lines (1/2*2)(0 dBm, 600 Ω, RTS/4W*2)PGM: 1 line, input (0 dBm/600 Ω)Tally input: Red, Green, 1 input eachROP interface: RS-422, 1 line, 12 V outputMSU interface: RS-422, 1 line, GPI for controlLAN port: 1 line (8-pin, RJ45)*2: Depending on the setting, only one of them can be selected at one time.*3: The black burst signal and tri-level sync signal of the reference input are recognizedautomatically.AK-HRP200G Remote Operation Panel (ROP)Power Supply: 12 V DCPower Consumption: 4.2 WOperating Temperature: 0 °C to 40 °C (32 °F to 104 °F)Storage Temperature: −20 °C to 60 °C (−4 °F to 140 °F)Operating Humidity: 90 % or lessDimensions (W x H x D): 92 mm x 308 mm x 55 mm(3-5/8 inches x12-1/8 inches x 2-3/16 inches)excluding protrusionsWeight: Approx. 1.3 kg (approx. 2.87lb)CCU Control: • Control signals (camera, CCU control)• Power supply (12 V DC)*4• Tally control signalPREVIEW control: Contact outputMaximum cable length: 50 m (164 ft)*4: Can be provided from CCU or AC adapterAK-HVF70G 17.8 cm (7 inch) LCD Color ViewfinderPower Supply: DC 12 V (supplied by the camera)Power Consumption: 10 WOperating Temperature: 0 °C to 45 °C (32 °F to 113 °F)Storage Temperature: –20 °C to 60 °C (–4 °F to 140 °F)Operating Humidity: 10% to 85% (no condensation)Dimensions (W x H x D): 243.5 mm x 212 mm x 172 mm(9-19/32 inches x 8-11/32 inches x 6-25/32 inches)(with hood attached)243.5 mm x 212 mm x 85 mm(9-19/32 inches x 8-11/32 inches x 3-11/32 inches)(without hood)Weight: Approx. 1.6 kg (approx. 3.53 lb) (without hood)Panel Size: 177.8 mm (7.0 inches)Number of Pixels: 1024 pixel x 600 pixel (WSVGA)Display Colors: Approx. 16,200,000 colorsOperation Panel: POWER switch x 1, MENU button x 1SELECT dial x1, Function buttons x 3Picture adjusting knobs x 3([BRIGHT], [CONTRAST], [PEAKING])Connectors: Camera I/F connector (D-Sub 29-pin x 1)Weight and dimensions are approximate.Specifications are subject to change without notice.As of March, 20146

/ 8

Related manuals for Panasonic AK-HC3800