Panasonic AK-HRP900P Operating Instructions Manual

Contents

4OutlineCoupling . . . . . . . . . . . . . . . . . . . . . . .1 pcMulti-cable . . . . . . . . . . . . . . . . . . . . . .1 pcSeal . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pcSetscrews . . . . . . . . . . . . . . . . . . . . .8 pcsM4 x 8 mm . . . . . . . .4 pcsM5 x 8 mm . . . . . . . .4 pcs≥ This unit is a camera controller for multi-purpose camera (AK-HC900P). Thisunit is connected to a multi-purpose camera with one multi-cable, and capableof transmitting and receiving various camera and lens control signals, analogpicture signals of cameras, and generator lock signals (3-value SYNC).≥ The extension distance between this unit and the camera is 33 ft (10m) max.≥ It is possible to control the swivel stand from the pan-tilt control panel AW-RP301 by using the swivel stand control input connector.Check the AccessoriesPrecautions for Use≥ We recommend that the AC adapter AW-PS505P is used for power supply.≥ Handle the unit with care.If dropped or given a strong shock, it may cause a trouble or accident.≥ Use the unit in a temperature range of 32oF to 104oF (0oC to + 40oC).If used at a temperature below 32oF or higher than 104oF, it may cause bad influences tothe component parts.≥ Turn off the power before connecting or disconnecting the cable.When connecting or disconnecting the cable, be sure to turn off the power switch of theunit beforehand.≥ Avoid using the unit outdoors.≥ Install the unit 3.3 ft (1 m) away from the monitor.≥ MaintenancePull out the power cord plug and clean the unit with dry cloth. If it is hard to clean,moisten the cloth with a diluted neutral detergent solution and squeeze it well and lightlywipe the unit.≥ Do not use volatile solvents such as benzene or thinner.≥ When using a chemical mop, carefully read the instructions.Precautions