Panasonic AK-HTF900P Operating Instructions Manual

Contents

Panasonic AK-HTF900P Operating Instructions Manual Manual pdf 3 page image

3ContentsFor Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Controls and their Functions_ Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4_ Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5How To Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Appearance and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Outline≥ This unit is able to separate multiple data (camera control data and swivel stand controldata) transmitted from the camera controller (AK-HRP900P), and to output the controlinformation to the multi-purpose camera (AK-HC900P) and the swivel stand (AW-PH300A, etc.).≥ The distance between this unit and the camera is 33 ft (10m) max.Precautions for Use≥ We recommend that the AC adapter AW-PS505P is used for power supply.≥ Handle the unit with care.If dropped or given a strong shock, it may cause a trouble or accident.≥ Use the unit in a temperature range of 32oF to 104oF (0oC to + 40oC).If used at a temperature below 32oF or higher than 104oF, it may cause bad influences tothe component parts.≥ Turn off the power before connecting or disconnecting the cable.When connecting or disconnecting the cable, be sure to turn off the power switch of theunit beforehand.≥ Avoid using the unit outdoors.≥ Install the unit 3.3 ft (1 m) away from the monitor.≥ MaintenancePull out the power cord plug and clean the unit with dry cloth. If it is hard to clean,moisten the cloth with a diluted neutral detergent solution and squeeze it well and lightlywipe the unit.≥ Do not use volatile solvents such as benzene or thinner.≥ When using a chemical mop, carefully read the instructions.Precautions