4Description of information displayedWARNINGThe warning information is displayed when trouble is detected in theunit, camera, or optical fiber multi cableThe warning information items are displayed top alignedA displayed warning information item is cleared when the statusbecomes normal- WARNING -CAM RCV LVL NGCCU RCV LVL NGWarning information itemsDisplay item DescriptionCAM RCV LVL NG The level of the optical signal received by thecamera is lowCCU RCV LVL NG The level of the optical signal received by theunit is lowCABLE OPEN The optical fiber multi cable is not connectedCABLE SHORT The optical fiber multi cable is shortedCAM FAN NG Trouble with the cooling fan of the cameraCCU HIGH TEMP The temperature of the unit is abnormally highCAM WARM-UP The camera is warming upROP SAVING DATA The data managed by the camera and this unitis being saved to the memory card in the ROPTo clear the warning information displays, press the button belowROP (AK-HRP200): CHARA buttonIRIS displayWhen the information is not displayed on the picture monitor, display itby pressing the CHARA button of the ROPThe camera number is displayed at the top left of the screen, the IRISlevel is displayed at the bottom of the screen, and the IRIS f-value isdisplayed at the bottom right of the screenSet each item to be displayed on the “PM VIEW SETTING” screen thatcan be accessed by selecting “MAINTENANCE” on the menuHowever, this screen will not appear if the menu’s “IRIS LEVEL” settingis “OFF”C1F4.8C-- --+-----0Camera numberIRIS f-valueIRIS level**: The IRIS level is displayed based on the IRIS f-valueStatus displaysFrom the IRIS display screen, press the CHARA button of the ROP todisplay the statusesThe camera number, scene file number, shutter value, and extenderinformation are displayed at the top of the screen The ND filter value,gain value, and IRIS f-value are displayed at the bottom of the screenSet each item to be displayed on the “PM VIEW SETTING” screen thatcan be accessed by selecting “MAINTENANCE” on the menuHowever, when the “IRIS LEVEL” setting is “OFF”, the screen will bedisplayed first if the CHARA button of the ROP is pressed when theinformation is not displayed on the picture monitorC1 CAM59.94i SCENE1 1500EX DZ×2EX ×21 12dB CLOSECamera number Scene file numberShutter valueND filter value Gain valueExtender informationIRIS f-valueCamera format**: The camera format value indicates the format of the signal outputfrom the cameraPicture monitor (PM) displays (Continued)