49Chapter 9 Configure Video SourcesThe addition of NDI (Network Device Interface) support to its four3G SDI and the HDMI input provides AV-HLC100 a full range ofinput and output possibilities. Generally, an NDI source needslittle if any configuration, but traditional sources may require youto choose between optional connection methods and settings.Note: To receive NDI|HX sources, such as the output from NDI-enabled Panasonic cameras, the NewTek NDI|HX driver forWindows ® must be installed on AV-HLC100.These settings are provided in the Input Configuration panel foreach Switcher source. As mentioned in the previous chapter, aconfiguration gear is shown when you move the mouse-pointerover a viewport. Clicking this gear, or double-clicking theviewport (above the label) opens the Input Configuration panelfor the corresponding Switcher input.Section 9.1 Input Settings TabThe first tab is labeled Input Settings, and itallows you to manage all source configuration,connection and control, and identificationmatters.9.1.1 Source OptionsWe considered Source and Format settings backin passing back in Section 6.8. Let’s look at theseitems in a little more detail now.Local SourcesLocal sources are listed first in the Source menu.Most of the local sources consist of the four hardware inputs found on the back of the system (Input 1being shared between SDI and HDMI input ports). In addition, you will see an entry labeled Skype TXCaller, which we will discuss later (see Appendix C).FIGURE 41FIGURE 42FIGURE 43
