96Setup menu list (continued)CARD FUNCTIONS screenItem Displaymode Description of settingsCARDFORMAT(Camera)(PB)Formats the SD Memory Card.YES: Formats the card.NO: Returns to the last screen.CARD STATUS (Camera)(PB)Displays the SD Memory Card status.YES: Displays the card status.NO: Returns to the last screen.CLIPPROPERTY(PB) Displays information about the selected clip.YES: Displays clip information.NO: Returns to the last screen.USER FILE screenItem Displaymode Description of settingsCARD READ/WRITE(Camera)(PB)You can save four user file settings to the SD Memory Card, and can also title thesaved files.READ: ReadWRITE: WriteNO: Returns to the last screen.LOAD/SAVE/INIT(Camera)(PB)LOAD: Loads the settings in a previously stored user file.SAVE: Saves the updated user file settings.INITIALIZE: Returns the user settings in the user file to the factory settings.NO: Returns to the last screen.After a LOAD or INITIALIZE operation, turn the POWER switch off and thenback on again to make the new settings available.The INITIALIZE operations do not change the TIME ZONE settings. (Page 99)••META DATA screenItem Displaymode Description of settingsCARD READ (Camera) Loads the metadata recorded on the SD Memory Card into the unit.YES NO“NO FILE” is displayed when no metadata is recorded in the SD Memory Card.•RECORD (Camera) Sets whether to record the metadata to be loaded into the unit simultaneously ona SD Memory Card.ON: Records simultaneously.OFF: Does not record simultaneously.USER CLIPNAME(Camera) Selects the method of USER CLIP NAME recording.TYPE1: User clip name is the same as the CLIP NAME if there is no uploadedmetadata or data.TYPE2: User clip name is the same as the CLIP NAME if no combination of dataand COUNT value is uploaded, or if there is no uploaded data.CLIP COUNTRESET(Camera) Resets the COUNT value to 1.YES NOMETA DATAPROP(Camera) Displays the metadata which has been recorded in the unit.YES NOindicates the factory setting.
