Panasonic AVCCAM AG-HMC41E Operating Instructions Manual

Also see for AVCCAM AG-HMC41E: Service manual

Contents

Panasonic AVCCAM AG-HMC41E Operating Instructions Manual Manual pdf 59 page image

59 ShootingSpecifying the time codeSet TC PRESET so you can record a value ofyour choice as the initial setting for the time codeto be used at the start of recording.1 Set the POWER switch to ON. (Page 26)2 Touch the TC PRESET item in the settingmenu RECORD SETUP screen.Menu operation (Page 95)Operations may also be performedusing buttons on the remote control thatcorrespond to those on the camera. Fordetails, see “Description of parts (Remotecontrol)”. (Page 0)3 Touch YES.4 Touch the item you want to set, and touchor to set the value.You can reset the time code to zero by pressingRESET button.Cameraャモンヴヤヰヶワヵユンンユヴユヵュリヴヱバヮヰュユヤラレヰリヴ・ユャンモ••Recharging the built-in batteryThe camera’s internal battery saves the date andtime.When SET DATE AND TIME is displayed evenwhen the date and time are set, it means that thecharge of the internal battery is depleted. Do thefollowing to recharge it.Reset the date and time when fully recharged.1 Connect the AC adapter. (Page 23)Leave the POWER switch at OFF.2 Leave the camera-recorder like this forabout 4 hours.The internal battery charges during this time.Check the time code and menu operationsafter recharging.If the date and time are not memorized afterrecharging, the internal battery requires changing.Please consult the place of purchase.Setting the time codeIn the setup menus, RECORD SETUP screen, setthe following time code related items. (Page 10)TCGTC PRESET•••••Charging the built-in battery/Setting the time code(Continued on the next page)